How To Boot XIOAMI Device in EDL Mode(Flash Mode)-Qualcomm Snapdragon Processor:
Sometimes, we may face the irregular software error in our phone and we think its better to reset the phone but in some case it stills doesn’t fixes the problem. So only way to fix it we think is re-flashing the stock software. But in cases of XIAOMI devices(Qualcomm Processor), the way to flash stock rom as complete factory reset is through EDL Mode also called flash mode. So How to boot xiaomi device in EDL Mode ?
EDL mode only exists in XIAOMI devices having Qualcomm Snapdragon Processor. Basically there are two ways to boot the device into EDL Mode.
Method No. 01 : First and easiest mode is through fastboot command. But the condition to boot EDL mode from fastboot mode is phone’s bootloader must be unlocked. If the bootloader is unlocked then simply connect the phone into fastboot mode. To boot the phone into fastboot mode, at first phone must be powered off and then hold power and volume down to boot the device fastboot mode. Once the phone is booted into fastboot mode, then open ADB & Fastboot tool and copy and paste the following command.
command 1 : fastboot devices
command 2 : fastboot oem edl
Then the device must be booted into edl mode, you can confirm it by checking device manager if there is “Qualcomm HS-USB QDLoader 9008 (COMXX) -> XX(any numbers) , under Ports(COM & LPT)
Method No. 02 : Second method to boot the phone into EDL mode needs a little bit hardware knowledge. You can boot EDL mode by shorting test points. Test points are the point which located near the battery connector inside the back panel of the phone. First, you need to open the back cover of your phone which may need some tools. Then you need to find the test points, they may vary according to device models you can Google for it. After that, you need to short the points using Twezzer (Commonly Used) and at same time holding test points you need to connect the device to computer using USB cable. Don’t leave the points and try untill you are confirmed it is booted into EDL mode, again you can confirm it by checking device manager if there is “Qualcomm HS-USB QDLoader 9008 (COMXX) -> XX(any numbers) , under Ports(COM & LPT).
How To Boot XIOAMI Device into Preloader/BROM Mode(Flash Mode)-MediaTek Processor:
Preloader/BROM Mode only exists in XIAOMI devices having MediaTek Chipset.
Preloader/BROM Mode : During Flashing Process, Device power should be turned off and normally connect the device with computer it will boot into Preloader/BROM mode. In some cases you need to open the back panel and disconnect the battery connector and reconnect it again, to boot into preloader mode while BROM mode can easily be connected without opening back panel.
You can confirm it by checking device manager if there is “MediaTek Preloader USB VCOM Port(COMXX) -> XX(any numbers) , under Ports(COM & LPT).
NEED HELP ?
SO IF YOU ARE REALLY TIRED OF THESE THINGS AND GOT TENSED OF HAVING HARDBRICKED DEVICES, WE ARE HERE TO HELP YOU OUT BY PROVIDING SOME REMOTE SERVICES REGARDING :
- HARD BRICK
- SOFT BRICK
- BOOT LOOP
- BOOTLOADER UNLOCK
- SYSTEM HAS BEEN DESTROYED
- MI ACCOUNT UNLOCK
THEN FEEL FREE TO CHECK OUT OUR REMOTE SERVICES(Click Here) OR CAN CONTACT DIRECTLY TO ME ON TELEGRAM(Click Here).